Honda GX240RT2 Service And Repair Manual page 257

CHARGING SYSTEM
CHARGE / POWER COIL REMOVAL/
INSTALLATION
(*) Refer to page of base shop manual (GX240/GX270/GX340GX390UT2, part number 61Z5F00E3).
Remove the following:
– Fan cover (page 5-2)
– Ignition coil (page 9-3)
– Starter motor (page 10-8)
– Flywheel (page 8-7)*
Installation is in the reverse of removal.
When installing the cord clamp, refer to HARNESS AND TUBE ROUTING
(page 2-3).
CORD CLAMP
BOLT (6 x 12 mm)
GX270UT2:
BOLT (6 x 28 mm) (2)
GX390T2/UT2:
BOLT (6 x 40 mm) (2)
POWER COIL
GX270UT2:
BOLT (6 x 25 mm) (2)
GX390T2/UT2:
BOLT (6 x 35 mm) (2)
0.9 A CHARGE COIL
gx240ut2_gx270ut2_gx340ut2_gx390ut2
CORD GROMMET
BOLT (6 x 12 mm)
CORD CLAMP
CORD GROMMET