Control Box Removal/Installation - Honda GX240RT2 Service And Repair Manual

CONTROL BOX REMOVAL/INSTALLATION

Disconnect the control box wires.
When installing, refer to the HARNESS AND TUBE ROUTING (with circuit protector)
CHARGE COIL WIRE
CONTROL BOX (With Circuit Protector)
gx240ut2_gx270ut2_gx340ut2_gx390ut2
IGNITION COIL WIRES
OTHER ELECTRICAL
(page 2-12).
COMBINATION SWITCH
WIRE
BOLT (6 x 12 mm) (2)
CONTROL BOX (Without Circuit Protector)
Connection of control box
wires are depending on the
application of the engine,
therefore, it does not indicate
those parts in this manual.