Honda GX240RT2 Service And Repair Manual page 275

gx240ut2_gx270ut2_gx340ut2_gx390ut2
STARTING SYSTEM
ARMATURE CONTINUITY CHECK -
COMMUTATOR SEGMENTS
Check for continuity between segments. If an open cir-
cuit (no continuity) exists between any two segments,
replace the armature (page 10-9).
ARMATURE CONTINUITY CHECK -
COMMUTATOR TO CORE
Check for continuity between the commutator segments
and the armature coil core.
Replace the armature if continuity exists between any
of the commutator segments and the armature coil core
(page 10-9).
OVERRUNNING CLUTCH
Hold the pinion gear (1) as shown and check that the
(1)
gear turns clockwise and slides smoothly.
If necessary, apply oil or replace the overrunning clutch.
Check the pinion gear for wear or damage, and replace
the overrunning clutch if necessary.
If the pinion gear is worn or damaged, the flywheel ring
gear must be inspected.