Honda GX240RT2 Service And Repair Manual page 280

CONTROL BOX REMOVAL/INSTALLATION
When installing the control box, refer to HARNESS AND TUBE ROUTING
CONTROL BOX DISASSEMBLY/ASSEMBLY
(*) Refer to page of base shop manual (GX240/GX270/GX340/GX390UT2, P/N 61Z5F00E3)
Remove the control box (page
gx240ut2_gx270ut2_gx340ut2_gx390ut2
CHARGE COIL CORD
11-3).
OTHER ELECTRICAL
(page 2-3).
STARTER MOTOR NUT (8 mm)
8.8 N·m (0.90 kgf·m, 6.5 lbf·ft)
ENGINE WIRE HARNESS
CONTROL BOX
CORD GROMMET
COMBINATION SWITCH
HARNESS
BOLT (6 x 12 mm) (2)