Oil Level Check; Oil Change; Reduction Case Oil; Recommended Oil - Honda GX120 Owner's Manual

Hide thumbs Also See for GX120:
Table of Contents

Advertisement

Available languages

Available languages

Oil Level Check

Check the engine oil level w ith the engine stopped and in a level
position.
1.
Rem ove the oil filler cap/dipstick and w ipe it clean.
2.
Insert the oil filler cap/dipstick into the oil filler neck as show n,
but do not screw it in, then rem ove it to check the oil level.
3.
If the oil level is near or below the low er lim it m ark on the
dipstick, fill w ith the recom m ended oil (see page
upper lim it m ark (bottom edge of the oil fill hole). Do not overfill.
4.
Reinstall the oil filler cap/dipstick.
OIL FILLER CAP/DIPSTICK
OIL FILL HOLE
(bottom edge)
Running the engine with a low oil level can cause engine damage.
The Oil Alert system (applicable types) w ill autom atically stop the
engine before the oil level falls below the safe lim it. How ever, to
avoid the inconvenience of an unexpected shutdow n, alw ays
check the engine oil level before startup.

Oil Change

Drain the used oil w hen the engine is warm . Warm oil drains
quickly and com pletely.
1.
Place a suitable container below the engine to catch the used oil,
then rem ove the oil filler cap/dipstick, oil drain plug and w asher.
2.
Allow the used oil to drain com pletely, then reinstall the oil drain
plug and new w asher, and tighten the oil drain plug securely.
Please dispose of used m otor oil in a m anner that is com patible
w ith the environm ent. We suggest you take used oil in a sealed
container to your local recycling center or service station for
reclam ation. Do not throw it in the trash, pour it on the ground,
or down a drain.
3.
With the engine in a level position, fill to the upper lim it m ark
(bottom edge of the oil fill hole) on the dipstick w ith the
recom m ended oil (see page ).
Running the engine with a low oil level can cause engine
damage.
The Oil Alert system (applicable types) w ill autom atically stop
the engine before the oil level falls below the safe lim it.
How ever, to avoid the inconvenience of an unexpected
shutdown, fill to the upper lim it, and check the oil level regularly.
8
) to the
UPPER LIMIT
LOWER LIMIT
8
4.
Install the oil filler cap/dipstick and tighten securely.
DRAIN PLUG
REDUCTION CASE OIL (applicable types)

Recommended Oil

Use the sam e oil that is recom m ended for the engine (see page ).
Oil Level Check
Check the reduction case oil level w ith the engine stopped and in a
level position.
2 : 1 Reduction Case With Centrifugal Clutch
1.
Rem ove the oil filler cap/dipstick and w ipe it clean.
2.
Insert and rem ove the oil filler cap/dipstick w ithout screw ing it
into the filler hole. Check the oil level show n on the oil filler cap/
dipstick.
3.
If the oil level is low , add oil to reach the upper lim it m ark on the
dipstick w ith the recom m ended oil.
4.
Screw in the oil filler cap/dipstick and tighten securely.
UPPER
LIMIT
LOWER LIMIT
ENGLISH
OIL FILLER CAP/
DIPSTICK
WASHER
OIL LEVEL
FILLER CAP/DIPSTICK
8
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gx160Gx200

Table of Contents