Lacp Configuration; Lacp Port Configuration - NETGEAR S3300 User Manual

LACP Configuration

The LACP configuration screen is used to set the LACP system priority.

To configure LACP:
1. Select Switching> LAG > Advanced > LACP Configuration.
2. In the LACP System Priority field, specify the device's link aggregation priority relative to the
devices at the other ends of the links on which link aggregation is enabled.
A higher value indicates a lower priority. You can change the value of the parameter
globally by specifying a priority from 1–65535. The default value is 32768.
3. Click the Apply button.

LACP Port Configuration

The LACP port configuration screen is used to configure the LACP priority value for the
selected port and the administrative LACP time-out value.

To configure LACP port priority settings:
1. Select Switching> LAG > Advanced > LACP Port Configuration.
2. Select the ports to configure:
For information about how to select and configure one or more ports and LAGs, see
Configuring Interface Settings
3. Configure the LACP Priority value for the selected port(s).
This value specifies the device's link aggregation priority relative to the devices at the
other ends of the links on which link aggregation is enabled. A higher value indicates a
lower priority.
4. Configure the administrative LACP time-out value.
• Long. Specifies a long time-out value.
• Short. Specifies a short time-out value.
5. Click the Apply button.
S3300 Smart Managed Pro Switch
on page 32.
Configuring Switching
143