Ip Configuration - NETGEAR S3300 User Manual

Table 12. Slot Information (continued)
Field
Card Index
Card Type
Card Descriptor
Supported Switch
Switch Model ID
Switch Index
Management Preference Displays management preference of the supported switch.
Click Update to update the page with the latest information on the switch.

IP Configuration

Use the IP Configuration screen to configure network information for the management
interface, which is the logical interface used for in-band connectivity with the switch through
any of the switch's front-panel ports. The configuration parameters associated with the
switch's network interface do not affect the configuration of the front panel ports through
which traffic is switched or routed.

To configure the network information for the management interface:
1. Select System > Management > IP Configuration.
Figure 28. IP Configuration
2. Select the appropriate radio button to determine how to configure the network information for
the switch management interface:
• Dynamic IP Address (DHCP). Specifies that the switch must obtain the IP address
through a DHCP server.
• Dynamic IP Address (BOOTP). Specifies that the switch must obtain the IP address
through a BootP server.
S3300 Smart Managed Pro Switch
Description
Displays the index assigned to the selected card type.
Displays the hardware type of this supported card. This is a 32-bit data field.
Displays a data field used to identify the supported card.
Displays the list of models of all supported switches.
Displays the index assigned to the selected switch.
Configure System Information
48