NETGEAR S3300 User Manual page 66

The Dynamic Host Configuration table shows host name-to-IP address entries that the switch
has learned. The following table describes the dynamic host fields:
Table 16. Dynamically learned host name mapping information
Field
Host
Total
Elapsed
Type
Addresses
Click Clear to delete dynamic host entries. The table will be repopulated with entries as they
are learned.
Configure and View Host Name-to-IP Address Information
Use this screen to manually map host names to IP addresses or to view dynamic DNS
mappings.

To add a static entry to the local DNS table:
1. Select System > Management > DNS > Host Configuration.
Figure 39. DNS Host Configuration
2. In the Host Name field, specify the static host name to add.
3. In the IPv4/IPv6 Address field, specify the IP address to associate with the host name.
4. Click the Add button.

To remove an entry from the static DNS table:
1. Select the check box next to the entry to remove.
2. Click the Delete button.
S3300 Smart Managed Pro Switch
Description
Lists the host name you assign to the specified IP address.
Amount of time since the dynamic entry was first added to the table.
Amount of time since the dynamic entry was last updated.
The type of the dynamic entry.
Lists the IP address associated with the host name.
Configure System Information
66