NETGEAR S3300 User Manual page 19

Figure 5. Local Area Connection Properties Window
4. Select the Internet Protocol Version 4 (TCP/IPv4) option, and then click the Properties
button.
The Internet Protocol Version 4 (TCP/IPv4) Properties window appears.
5. Select the Use the following IP address option and set the IP address of the administrative
system to an address in the 192.168.0.0 network, such as 192.168.0.200.
The IP address must be different from that of the switch but within the same subnet.
S3300 Smart Managed Pro Switch
Getting Started
19