Diffserv Configuration - NETGEAR S3300 User Manual

Diffserv Configuration

Use the DiffServ Configuration screen to display DiffServ general status group information,
which includes the current administrative mode setting as well as the current and maximum
number of rows in each of the main DiffServ private MIB tables.

To configure the global DiffServ mode:
1. Select QoS > DiffServ > Advanced > DiffServ Configuration.
2. Next to DiffServ Admin Mode, select Enable.
If you disable DiffServ after it has been configured and enabled, the DiffServ configuration
is retained and can be changed, but it is not active.
3. Click the Apply button to send the updated configuration to the switch. Configuration
changes take effect immediately.
4. Click the Cancel button to cancel the configuration on the screen, and reset the data on the
screen to the latest value of the switch.
The following table describes the information displayed in the Status table on the DiffServ
Configuration screen:
Table 84. DiffServ MIB table information
Field
Class Table
Class Rule Table
Policy Table
Policy Instance Table
Policy Attributes Table The current and maximum number of rows of the policy attributes table. The max size is
Service Table
S3300 Smart Managed Pro Switch
Description
The current and maximum number of rows of the class table. The max size is 32.
The current and maximum number of rows of the class rule table. The max size is 192.
The current and maximum number of rows of the policy table. The max size is 32.
The current and maximum number of rows of the policy instance table. The max size is
320.
320.
The current and maximum number of rows of the service table. The max size is 338.
Configuring Quality of Service
230