NETGEAR S3300 User Manual page 72


To display Green Ethernet mode settings for a Remote Device
Figure 43. Remote Device Information
1. From the Interface list, select the interface.
Table 18, Green Ethernet Local Device Information
information about the Green Ethernet status and statistics on the local device.
Table 18. Green Ethernet Local Device Information
Field
Remote ID
Remote Tw_sys_tx (uSec)
Remote Tw_sys_tx Echo (uSec)
Remote Tw_sys_rx (uSec)
Remote Tw_sys_rx Echo (uSec)
Remote Fallback Tw_sys (uSec)
2. Click Clear to clear the configuration and reset all statistics for the selected interface to the
default values.
Green Ethernet Summary
This screen summarizes the Green Ethernet Summary settings currently in use.
To access the Green Ethernet Summary screen, select System > Management > Green
Ethernet > Green Ethernet Summary.
S3300 Smart Managed Pro Switch
Description
Specifies the remote client identifier assigned to the
remote system.
An integer that indicates the value in microseconds of
Tw_sys that the remote system can support.
Integer that indicates the value in microseconds of
Transmit Tw_sys echoed back by the remote system.
Integer that indicates the value in microseconds of
Tw_sys that the remote system requests from the local
system.
Integer that indicates the value in microseconds of
Receive Tw_sys echoed back by the remote system.
Integer that indicates the value in microseconds of
fallback Tw_sys that the remote system is advertising.
Configure System Information
72
displays the following non-configurable