NETGEAR S3300 User Manual page 203

The following table shows the non-configurable information on the 802.1AS Configuration
screen.
Table 75. 802.1AS Global Status
Field
GrandMaster Present
Best Clock Identity
Best Clock Priority1
Best Clock Priority2
Steps to Best Clock
Local Clock Identity
Last GM Change Timestamp
802.1AS (EAV) in a Stacking Environment
If all the four Uplink ports are configured in Stacking mode, then the EAV pages are disabled
and the 802.1AS (EAV) unavailable message is displayed:
• On the Switching > 802.1AS > Basic > 802.1AS Configuration screen as shown in
Figure 89, Switching > 802.1AS (EAV)
Figure 89. Switching > 802.1AS (EAV) Unavailable
• On the Switching > MRP > Basic > MRP Configuration screen as shown in
Switching > MRP > 802.1AS (EAV)
Figure 90. Switching > MRP > 802.1AS (EAV) Unavailable
S3300 Smart Managed Pro Switch
Description
Identifies whether Grand Master Clock is present. The default is False.
The Best Clock Identity detected by this time-aware bridge.
The Priority1 value of the best clock on the switch.
The Priority2 value of the best clock on the switch.
The number of links in the path from the Best Clock to this time-aware bridge. If
this time-aware bridge is the best, the value is zero.
The Clock Identity of this time-aware bridge.
The system time when the most recent grandmaster clock change occurred.
Unavailable.
Unavailable.
Configuring Switching
203
Figure 90,