NETGEAR S3300 User Manual page 105

Table 35. LLDP-MED Neighbors Information
Field
LLDP-MED Interface Selection
Remote ID
Capability Information
Supported Capabilities
Enabled Capabilities
Device Class
Network Policies
Information
Media Application Type
VLAN ID
Priority
DSCP
Unknown Bit Status
Tagged Bit Status
Inventory Information
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer Name
Model Name
Asset ID
Location Information
Sub Type
Location Information
S3300 Smart Managed Pro Switch
Description
Specifies the remote client identifier assigned to the remote system.
This table specifies the supported and enabled capabilities received in MED
TLV on this port.
Specifies supported capabilities received in MED TLV on this port.
Specifies enabled capabilities received in MED TLV on this port.
Specifies the device class as advertised by the device remotely connected to
the port.
This table specifies if network policy TLV is received in the LLDP frames on this
port.
Specifies the application type. Types of application types are unknown,
voicesignaling, guestvoice, guestvoicesignalling, softphonevoice,
videoconferencing, streamingvideo, videosignalling. Each application type that
is received has the VLAN ID, priority, DSCP, tagged bit status and unknown bit
status. A port may receive one or many such application types. If a network
policy TLV has been received on this port, only then would this information be
displayed.
Specifies the VLAN ID associated with a particular policy type.
Specifies the priority associated with a particular policy type.
Specifies the DSCP associated with a particular policy type.
Specifies the unknown bit associated with a particular policy type.
Specifies the tagged bit associated with a particular policy type.
This table specifies if inventory TLV is received in LLDP frames on this port.
Specifies the hardware version of the remote device.
Specifies the firmware version of the remote device.
Specifies the software version of the remote device.
Specifies the serial number of the remote device.
Specifies the manufacturer name of the remote device.
Specifies the model name of the remote device.
Specifies the asset ID of the remote device.
This table specifies if location TLV is received in LLDP frames on this port.
Specifies the type of location information.
Specifies the location information in a string for a given type of location ID.
Configure System Information
105