NETGEAR S3300 User Manual page 179

Table 63. MLD snooping status information (continued)
Field
Interfaces Enabled for MLD
Snooping
VLAN IDs Enabled For MLD
Snooping
MLD Interface Configuration
For MLD snooping to be active on an interface, it must be enabled both globally and on the
interface (physical or LAG).

To configure an interface for MLD snooping:
1. Select Switching> Multicast > MLD Snooping > Interface Configuration.
2. Select each interface to configure.
For information about how to select and configure one or more ports or LAGs, see
Configuring Interface Settings
3. In the Admin Mode field, select the interface mode for the selected interface for MLD
snooping for the switch.
The default is disable.
4. In the Group Membership Interval (secs) field, specify the amount of time you want the
switch to wait for a report for a particular group on a particular interface before it deletes that
interface from the group.
The valid range is from (2 to 3600) seconds. The configured value must be greater than
Max Response Time. The default is 260 seconds.
5. In the Max Response Time (secs) field, specify the amount of time you want the switch to
wait after sending a query on an interface because it did not receive a report for a particular
group on that interface.
Enter a value greater or equal to 1 and less than the Group Membership Interval in
seconds. The default is 10 seconds. The configured value must be less than the Group
Membership Interval.
6. In the Present Expiration Time (secs) field, specify the amount of time you want the switch to
wait to receive a query on an interface before removing it from the list of interfaces with
multicast routers attached.
Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of zero
indicates an infinite time-out, that is, no expiration.
7. From the Fast Leave Admin Mode list, select the Fast Leave mode for a particular interface
from the menu.
The default is Disable.
8. Click the Apply button.
S3300 Smart Managed Pro Switch
Description
A list of all the interfaces currently enabled for MLD snooping. For information
about how to enable an interface for MLD snooping, see
Configuration on page 179.
The VLANs enabled for MLD snooping. For information about how to enable a
VLAN for MLD snooping, see
on page 32.
Configuring Switching
179
MLD VLAN Configuration on page 180.
MLD Interface