Initialize Port-Based Port(S) - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
Port
Time Interval
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either Port-based or MAC-based.

Initialize Port-based Port(s)

This window is used to display the authenticator diagnostics information.
To view this window, click Security > 802.1X > Initialize Port-based Port(s) as shown below:
Figure 8-17 Authenticator Diagnostics window
Description
Select the unit to be displayed. (EI and SI Mode Only)
Select a port to be displayed.
Use the drop-down menu to select the interval to update the statistics.
Figure 8-18 Initialize Port-based Port(s) window
329