Errors; View Errors; Diagnose Errors; Clear Errors And Reset Control Unit - Graco PGM Instructions - Parts Manual

Errors

View Errors

Errors can be viewed from the Home screen or from the
Alarm View screen.
Access the Alarm
View screen
There are three levels of errors: alarms, deviations, and
advisories. Alarms are critical and require immediate
correction; therefore the system automatically shuts
down. Deviations are important and require attention but
not immediately. Advisories are not critical but still
require attention.
NOTE:
• Errors set the dispenser ready signal LOW.
• Advisories and deviations do not set the dispenser
ready signal LOW.

Diagnose Errors

See Error Codes and Troubleshooting for valid error
codes, possible causes, and solutions.
3A5185B
Clear Errors and Reset Control
Unit
From the Alarm View screen, perform the following
steps to clear an error before restarting the control unit:
1. Press Acknowledge All List
2. Press Clear All Alarms
NOTE: Acknowledging alarms does not clear them.
NOTE: See the Configure Errors section on page 21.
Errors
31