Configure Errors - Graco PGM Instructions - Parts Manual

Precision gear metering

Hide thumbs Also See for PGM:

Table of Contents

System Setup

Configure Errors

Set the error type (error or deviation) that will be issued

if the pressure or drive torque goes outside the set high

and/or low limits. See Appendix A - User Interface

Display on page 82 for information on the purpose of

each error type.

NOTE: When an alarm is set to Error the machine

will be disabled when the alarm occurs.

1. With the system in setup mode, press

to nav-

igate to the Errors screen.

. 15

2. Select Enable or Disable for the Error Reset.

3. Select Error or Deviation for the Inlet Pressure.

4. Select Error or Deviation for the Outlet Pressure.

5. Select Error or Deviation for the Drive Torque.

3A5185B

Table of Contents