Show Evpn Evi - Cisco ASR 9000 Series Reference Manual

show evpn evi

show evpn evi
To display the EVPN E-VPN ID information, use the show evpn evi command in the EXEC mode.
show evpn evi ac-id [bridge-domain | detail | inclusive-multicast | location | mac | standby | vpn-id ]
Syntax Description
ac-id
bridge-domain
detail
inclusive-multicast
location
mac
standby
vpn-id
Command Default
None.
Command Modes
EXEC
Command History
Release
Release 4.3.2
Release 6.0.0
Release 6.1.2
Usage Guidelines
To use commands of this module, you must be in a user group associated with a task group that includes
appropriate task IDs. If the user group assignment is preventing you from using any command, contact your
AAA administrator for assistance.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
436
Specifies the attachment circuit id.
Displays information for a specified bridge-domain..
Displays detailed information.
Displays EVPN Inclusive Multicast information.
Displays location specific information.
Displays EVI MAC route associated configuration information.
Displays standby node specific information.
Displays information for a specified E-VPN Identifier.
Modification
This command was introduced.
The variable ac-id was added
The show command output is enhanced to display the Service Path
Preference parameters.
Provider Backbone Bridge Commands