Cisco ASR 9000 Series Reference Manual page 678

show access-lists ethernet-services
The following example displays the number of packets matching the implicit deny in access list l2_acl:
RP/0/RSP0/CPU0:router# show access-lists ethernet-services l2_ACL hardware ingress implicit
location 0/0/CPU0
ethernet-services access-list l1_acl
2147483647 implicit deny any any (2300 hw matches)
The following example displays the number of packets matching a particular sequence number:
RP/0/RSP0/CPU0:router# show access-lists ethernet-services l2_ACL hardware ingress sequence
20 location 0/0/CPU0
ethernet-services access-list l2_acl
20 deny host 0002.0003.0004 host 0005.0004.0003 (5394 hw matches)
The following example displays statistics for the TCAM entry for Ethernet services access list l2acl_4:
RP/0/RSP0/CPU0:router# show access-lists ethernet-services l2acl_4 hardware ingress sequence
10 detail location 0/6/CPU0
Wed Jun 24 00:28:51.367 UTC
ACL name: l2acl_4
Format type : 1
Channel ID: 2
Sequence Number: 10
Grant: permit
Logging: OFF
Hits: 0
Statistics pointer: 0x150628
Number of TCAM entries: 1
idx = 0
Entry : 0 for ACE : 10
RAW value
RAW mask
-------------------------------Field Details----------------------------------
outer_vlan_id value
outer_vlan_id mask
outer_vlan discard eligibility value: 00
outer_vlan discard eligibility mask : 01
outer_vlan_id cos value: 00
outer_vlan_id cos mask: 07
Ethernet type value
Ethernet type mask
Base app id value
Base app id value
Base acl id value
Base acl id mask
outer vlan id present value
outer vlan id present mask
inner vlan id present value
inner vlan id present mask
Mac source address value
Mac source address mask
Mac destination address value
Mac destination address mask
RP/0/RSP0/CPU0:router#
Related Commands
Command
copy access-list ethernet-service, on page 648
deny (ES ACL), on page 650
ethernet-service access-group, on page 653
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
664
: 40 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
: 00 03 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
: 0000
: 0ffff
: 0000
: ffff
: 02
: 00
: 0001
: 0000
: 0
: 1
: 0
: 1
: 0000 0000 0000
: ffff ffff ffff
: 0000 0000 0000
: ffff ffff ffff
Description
Creates a copy of an existing Ethernet services access list.
Sets conditions for an Ethernet services access list
Controls access to an interface.
Layer 2 Access List Commands