Tag-Impose - Cisco ASR 9000 Series Reference Manual

Point to Point Layer 2 Services Commands

tag-impose

To specify a tag for a VLAN ID configuration, use the tag-impose command in l2vpn configuration submode.
To remove the tag, use the no form of this command.
tag-impose vlan value
no tag-impose vlan value
Syntax Description
vlan
value
Command Default
None
Command Modes
L2VPN configuration
Command History
Release
Release 4.2.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples This example shows how to specify a tag for a VLAN:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# xconnect group xc1
RP/0/RSP0/CPU0:router(config-l2vpn-xc)#p2p grp1
RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p)#neighbor 10.1.1.2 pw-id 78
RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p-pw)#tag-impose vlan 8
VLAN in tagged mode.
Tag value. The range is from 1 to 4094. The default value is 0.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operations
read, write
tag-impose
6.1.x
217