Show L2Vpn Database - Cisco ASR 9000 Series Reference Manual

Point to Point Layer 2 Services Commands

show l2vpn database

To display L2VPN database, use the show l2vpn database command in EXEC mode.
show l2vpn database {ac| node}
Syntax Description
ac
node
Command Default
None
Command Modes
EXEC
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples The following example displays output for the show l2vpn database ac command:
RP/0/RSP0/CPU0:router# show l2vpn database ac
Displays L2VPN Attachment Circuit (AC) database
Displays L2VPN node database.
Bundle-Ether1.1:
Other-Segment MTU: 0
Other-Segment status flags: 0x0
Signaled capability valid: No
Signaled capability flags: 0x0
Configured capability flags: 0x0
XCID: 0xffffffff
PSN Type: Undefined
ETH data:
Xconnect tags: 0
Vlan rewrite tag: 0
AC defn:
ac-ifname: Bundle-Ether1.1
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operation
read
show l2vpn database
6.1.x
165