Ipv4 Mtu (Lxvpn) - Cisco ASR 9000 Series Reference Manual

ipv4 mtu (LxVPN)

ipv4 mtu (LxVPN)

To set the IPv4 MTU on the tunnel interface, use the ipv4 mtu command in interface configuration mode.
To remove the IPv4 MTU, use the no form of this command.
ipv4 mtu size
no ipv4 mtu size
Syntax Description
size
Command Default
None
Command Modes
Interface configuration
Command History
Release
Release 4.2.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
network
acl
Examples This example shows how to set the IPv4 MTU:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)#interface tunnel-ip 78 ipv4 mtu 78
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
36
Size of the MTU in bytes. The range is from 68 to 65535.
Modification
This command was introduced.
Operations
read, write
read, write
Generic Routing Encapsulation Commands