Cisco ASR 9000 Series Reference Manual page 683

Layer 2 Access List Commands
The following example shows the results of the command for a specific ACL:
RP/0/RSP0/CPU0:router# show access-list ethernet-services l2_acl usage pfilter location
0/0/CPU0
Interface : GigabitEthernet0/0/0/9
Related Commands
Command
copy access-list ethernet-service, on page 648
deny (ES ACL), on page 650
ethernet-service access-group, on page 653
ethernet-services access-list, on page 655
permit (ES ACL), on page 657
resequence access-list ethernet-service, on page
660
show access-lists ethernet-services, on page 662
show access-lists ethernet-services trace, on page
666
Input ACL : N/A
Output ACL : i
Input ACL : l2_acl
Output ACL : N/A
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
show access-list ethernet-service usage pfilter
Description
Creates a copy of an existing Ethernet services access list.
Sets conditions for an Ethernet services access list
Controls access to an interface.
Defines an Ethernet services (Layer 2) access list by name.
Sets conditions for an Ethernet services access list.
Renumbers existing statements and increment subsequent
statements to allow a new Ethernet services access list
statement.
Displays the contents of current Ethernet services access
lists.
Displays Ethernet services access list trace information.
6.1.x
669