Vlan-Id (Mstp) - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

vlan-id (MSTP)

To associate a set of VLAN IDs with the current MSTI, use the vlan-id command in MSTI configuration
submode.
vlan-id vlan-range [ vlan-range ] [ vlan-range ] [ vlan-range ]
Syntax Description
vlan-range
Command Default
None
Command Modes
MSTI configuration
Command History
Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
interface
Examples
The following example shows how to use the vlan-id command:
RP/0/RSP0/CPU0:router(config-mstp-inst)# vlan-id 2-1005
Related Commands
Command
debug spanning-tree mst packet, on page 479
debug spanning-tree mst protocol-state, on
page 481
instance (MSTP), on page 517
List of VLAN ranges in the form a-b, c, d, e-f, g etc.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operations
read, write
Description
Enables debugging for sent and received MSTP packets.
Enables debugging protocol-state changes such as port role or
state changes, topology change notification.
Enters the multiple spanning tree instance (MSTI)
configuration submode.
vlan-id (MSTP)
6.1.x
645