Show L2Vpn Forwarding - Cisco ASR 9000 Series Reference Manual

show l2vpn forwarding

show l2vpn forwarding
To display forwarding information from the layer2_fib manager on the line card, use the show l2vpn
forwarding command in EXEC mode.
show l2vpn forwarding {xconnect| bridge-domain| counter| debug | detail| dhcp binding| ethernet ring
g8032| gsp| hardware| inconsistent| interface| l2tp| l2tpv2| location [ node-id ]| message| monitor-session|
mstp| neighbor| object-queues| pbb| protection| pwgroup| resource| retry-list| summary| unresolved}
Syntax Description
xconnect
bridge-domain
counter
debug
detail
dhcp binding
ethernet ring g8032
gsp
hardware
inconsistent
interface
l2tp
l2tpv2
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
170
Point to Point Layer 2 Services Commands
Displays the cross-connect related
information.
Displays bridge domain related
forwarding information.
Displays the cross-connect
counters.
Displays debug information.
Displays detailed information from
the layer2_fib manager.
Displays DHCP binding related
forwarding information
Displays Ethernet associated
configuration information.
Displays GSP related forwarding
information.
Displays hardware-related
layer2_fib manager information.
Displays inconsistent entries only.
Displays the match AC
subinterface.
Displays L2TPv3 related
forwarding information.
Displays l2tpv2 related forwarding
information.