Point to Point Layer 2 Services Commands
show l2vpn pwhe
To display the pseudowire headend (PWHE) information, use the show l2vpn pwhe command in EXEC
mode.
show l2vpn pwhe {detail| interface| summary}
Syntax Description
detail
interface
summary
Command Default
None
Command Modes
EXEC
Command History
Release
Release 4.2.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples
This example show the sample output for show l2vpn pwhe detail command:
RP/0/RSP0/CPU0:router# show l2vpn pwhe detail
Interface: PW-Ether1
Interface handle 0x20000070
MTU:
BW:
Interface MAC addresses: 0279.96e9.8205
Label: 16000
L2-overhead: 0
VC-type: 5
CW: N
Specifies the details of the interface.
Specifies the name of the interface.
Specifies the summary information of the interface.
Interface State: Down, Admin state: Up
1514
10000 Kbit
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operations
read
show l2vpn pwhe
6.1.x
197