P2P; Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

p2p

p2p

To enter p2p configuration submode to configure point-to-point cross-connects, use the p2p command in
L2VPN xconnect mode. To return to the default behavior, use the no form of this command.
p2p xconnect-name
no p2p xconnect-name
Syntax Description
xconnect-name
Command Default
None
Command Modes
L2VPN xconnect
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The name of the point-to-point cross-connect string is a free format description string.
Task ID
Task ID
l2vpn
Examples The following example shows a point-to-point cross-connect configuration (including pseudowire
configuration):
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# xconnect group group 1
RP/0/RSP0/CPU0:router(config-l2vpn-xc)# p2p xc1

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

6.1.x
134
(Optional) Configures the name of the point-to-point cross- connect.
Modification
This command was introduced.
Operations
read, write
Point to Point Layer 2 Services Commands