Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

Point to Point Layer 2 Services Commands
Command Default
None
Command Modes
L2VPN pseudowire class configuration
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Note All L2VPN configurations can be deleted using the no l2vpn command.
Task ID
Task ID
l2vpn
Examples The following example shows how to define L2TPV3 pseudowire encapsulation:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class kanata01
RP/0/RSP0/CPU0:router(config-l2vpn-pwc)# encapsulation l2tpv3
The following example shows how to set the encapsulation and protocol to L2TPV3:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class kanata01
RP/0/RSP0/CPU0:router(config-l2vpn-pwc)# encapsulation l2tpv3
RP/0/RSP0/CPU0:router(config-l2vpn-pwc-l2tpv3)# protocol l2tpv3
Related Commands
Command
pw-class (L2VPN), on page 124
pw-class encapsulation mpls, on page 128

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

Modification
This command was introduced.
Operations
read, write
Description
Enters pseudowire class submode to define a pseudowire
class template.
Configures MPLS pseudowire encapsulation.
pw-class encapsulation l2tpv3
6.1.x
127