Show Lpts Pifib Hardware Entry Optimized - Cisco ASR 9000 Series Reference Manual

show lpts pifib hardware entry optimized

show lpts pifib hardware entry optimized
To display a set of optimized entries that are combined as a single entry, inside the Ternary Content Addressable
Memory (TCAM), use the show lpts pifib hardware entry optimized command in EXEC mode.
show lpts pifib hardware entry optimized location
Syntax Description
location
Command Default
None
Command Modes
EXEC
Command History
Release
Release 4.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
lpts
Examples
The following example shows the output of the show lpts pifib hardware entry optimizedcommand:
RP/0/RSP0/CPU0:router# show lpts pifib hardware entry optimized location 0/4/CPU0
Node: 0/4/CPU0:
----------------------------------------
Protocol - Layer4 Protocol; Intf - Interface in optimized list
Protocol
---------- ------------------------- --------------- ------------ --------------------
IGMP
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
670
Mandatory. The location of the line card where the interface is present.
laddr.Port, raddr.Port
224.0.0.22.any , any.any
224.0.0.22.any , any.any
any.any , any.any
Modification
This command was introduced.
Operation
read
Intf VRF id
Te0/4/0/0 *
Te0/4/0/1 *
Te0/4/0/0 *
Te0/4/0/1 *
Te0/4/0/0 *
Te0/4/0/1 *
Layer 2 Access List Commands
State
Uidb Set
Uidb Set
Uidb Set
Uidb Set
Uidb Set
Uidb Set