Transmit (Pvrst) - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

transmit (PVRST)

To set the transmit hold count performance parameter, use the transmit command in PVRST configuration
submode. To undo the setting, use the no form of this command.
transmit hold-count count
no transmit hold-count count
Syntax Description
hold-count
count
Command Default
None
Command Modes
PVRST configuration
Command History
Release
Release 5.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Examples This example shows how to set the bridge transmit hold-count parameter to 8:
RP/0/RSP0/CPU0:router(config)# spanning-tree pvrst st1
RP/0/RSP0/CPU0:router(config-pvrst)# transmit hold-count 8
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Specifies the hold count performance parameter
of the bridge.
Bridge transmit hold count. The range is from 1
to 10.
Modification
This command was introduced.
Operations
read, write
transmit (PVRST)
6.1.x
635