Show Stp Mst_Config_Id; Create Stp Instance_Id - D-Link DGS-1210/ME series Reference Manual

Regional Root Bridge
Designated Bridge
Configured Forward delay 15, Max age 18, Max hops 20
Operational Forward delay 15, Max age 18
Interface Role
------------- -------
5
DGS-1210-28P/ME:5#

show stp mst_config_id

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the MSTP configuration identification currently set on the Switch:
DGS-1210-28P/ME:5# show stp mst_config_id
Command: show stp mst_config_id
Name
Revision
Instance
--------
0
----------------------------------------------------------------------------
DGS-1210-28P/ME:5#

create stp instance_id

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Port 0
9c:d6:43:60:4f:a4
Path cost 0
9c:d6:43:60:4f:a4
Sts
-------
Designated Forwarding 20000
To display the MSTP configuration identification.
show stp mst_config_id
The show stp mst_config_id command displays the Switch's
current MSTP configuration identification.
None.
None.
[00:23:22:03:14:25]
0
Vlans mapped
----------------------------------------------------------
1-1024,1025-2048,2049-3072,3073-4094
To create instance ID on the Switch.
create stp instance_id <value 1-63>
The create stp instance_id command creates an instance ID of
STP on the Switch.
<value 1-63> - The value of the instance ID to be created.
Only administrator-level users can issue this command.
, path cost 0
Priority 32768
Priority 32768
Cost Prio.Nbr Type
------- ------------ ----------
128.5 Point to point
169