Self Check Function (Aculaser C2000) - Epson ACULASER COLOR 2000 Service Manual

EPSON AcuLaser C2000 / AcuLaser C1000

3.1.3 Self Check Function (AcuLaser C2000)

AcuLaser C2000 has the following mode for self-check function.
Test print
Check the trouble if it is the controller side error or the engine side error.
Procedure
1. Turn the printer OFF.
2. Remove the controller.
3. Remove the jammed paper.
4. Insert the paper on either Tray 1, Tray 2 or Tray 3.
5. Turn the printer ON.
6. Engine feeds a sheet in the priority order of option cassette, paper load
cassette, manual tray. If the optional double unit is installed, it also
operates.
If an error is occurred at the option, the printer does not
C A U T I O N
feed paper.
It takes about 1 minute to complete the paper feed from
the test start.
7. If the printer can perform printing normally, you can conclude that there is
no error on the engine side except the controller and interface error. The
printing pattern is shown below.
Troubleshooting Troubleshooting Method
Figure 3-1. Print Pattern
Revision E
107