Getting Printer Information Over The Network; Current Printer Status - Ricoh MP C2800 Operating Instructions Manual

4. Monitoring and Configuring the Printer

Getting Printer Information over the Network

This section explains details of each item displayed in the printer status and information.

Current Printer Status

This section explains how you can check the machine's status and the items displayed. Depending on the
options installed on the machine, some items might not be displayed.
• UNIX: Use the "lpq" command and "rsh", "rcp", "ftp", and "sftp" parameters.
• mshell: Use the "status" command.
4
Access Restricted
Add staples (Booklet: Back)
Add staples (Booklet: Both)
Add staples (Booklet: Front)
Adjusting...
Call Service Center
Canceled
Canceling Job...
Cannot Eject Original Through
Cannot multi-install: SD Card
Card/Counter not inserted
Coin or amount not inserted
Coin/Key Counter not inserted
Configuring...
Cooling Down Fusing Unit...
Cover Open: ADF
206
Messages Description
The job was canceled because user have no
authority.
The staple of booklet finisher (back) is exhausted.
The staple of booklet finisher is exhausted.
The staple of booklet finisher (front) is exhausted.
The machine is initializing or calibrating.
There is a malfunction in the machine.
The job is reset.
The job is being reset.
The original cannot be ejected.
The SD card has been configured using another
device.
The machine is waiting for prepaid card or key.
The machine is waiting for coin to be inserted.
The machine is waiting for coin or key counter.
Setting is being changed.
The fusing unit is cooling down.
The document feeder is open.