Ricoh MP C2800 Operating Instructions Manual page 204

4. Monitoring and Configuring the Printer
4
Username "character string"
Username2 "character string"
domain "character string"
password "character string"
srvcert {on|off}
202
Parameter Value configured
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap, mschapv2, pap, md5, or tls are
settings for the phase 2 method, and must be set
when using EAP-TTLS or PEAP.
Do not make these settings when using other EAP
authentication types.
If you select EAP-TTLS, you can select chap,
mschap, mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or
tls.
You can specify the login user name for the
Radius server.
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
You can specify the phase 2 username for EAP-
TTLS/PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
You can specify the login domain name for the
Radius server.
The characters you can enter are ASCII
0x20-0x7e (31 bytes), but not "@" or "\".
The default is blank.
You can specify the login for the Radius server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
You can set the server certificate. The default is
"off".