Ricoh MP C2800 Operating Instructions Manual page 236

4. Monitoring and Configuring the Printer
MIC failure TKIP counter measures stopped
Name registration failed. name=<NetBIOS name> Name registration of <NetBIOS Name> failed.
Name registration success in Broadcast
name=<NetBIOS name>
Name registration success. WINS server=<WINS
4
server address> NetBIOS Name=<NetBIOS
name>
no RADIUS/authentication server
no smart card detected on device
no WPA information element in probe response,
rescanning
Open log file <file name>
Printer <printer name> has no queue
Printer queue <print queue name> cannot be
serviced by printer 0, <print server name>
Print server <print server name> has no printer
Print sessions full
234
Message Problem and solutions
Counter measures have stopped after 60 seconds
(since the supplicant using TKIP started counter
measures against tampering).
Change to a different NetBIOS name.
Name registration by <NetBIOS Name>
broadcast was successful.
Name registration of <NetBIOS Name> to <WINS
server address> was successful.
The supplicant has received a message reporting
that a usable RADIUS server cannot be found.
PEAP/GTC (Generic Token Card) is selected, but
a smart card using GTC authentication cannot be
found.
There is no WPA information on the response from
the SSID probe of the access point you want to use.
The supplicant is rescanning.
The specified log file was opened when the print
server was online.
The print queue is not assigned to the printer when
the print server is online. Assign the print queue to
the printer using NetWare administrator account,
and then restart the printer.
The print queue cannot be established when the
print server is online. Make sure that the print queue
exists on the specified file server.
The printer was not assigned to the print server
when the print server is online. Use the NetWare
administrator account to assign the printer, and
then restart the printer.
No more print jobs can be accepted. Wait a while
before sending any more print jobs.