Status; Syslog; Upnp; Web - Ricoh MP C2800 Operating Instructions Manual

4. Monitoring and Configuring the Printer
Usable characters are ASCII 0x20-0x7e (32 bytes) other than "0".
The default key length is 1024, and the character string is blank.
If you do not specify this parameter, an open key with the default value will be created.
Deleting open key for ssh/sftp communication
msh> ssh delkey
• If you do not specify a character string, the current setting is displayed.
• SSH can only be used with SFTP.
4

status

Use the "status" command to display the printer status.
view messages
msh> status

syslog

Use the "syslog" command to display the information stored in the printer's system log.
View message
msh> syslog

upnp

Use the "upnp" command to display and configure the universal plug and play.
Public URL display
msh> upnp url
Public URL configuration
msh> upnp url "string"
• Enter the URL string in the character string.

web

Use the "web" command to display and configure parameters on Web Image Monitor.
194