Ricoh MP C2800 Operating Instructions Manual page 233

Message
client EAP method rejected
Client password rejected
Client TLS certificate rejected
connected DHCPv6 server <IPv6 address>
connecting
Could not attach to FileServer <error number>
Could not attach to PServer <print server>
connection from
Current Interface Speed: xxxMbps
Current IPX address <IPX address>
DHCPv6 server not found.
dpsd is disabled.
Problem and solutions
The authentication mode of the access point is
different with the authentication mode of the
supplicant.
Use the same authentication mode between the
access point and the supplicant.
The client's password was rejected. Check the client
password.
The client's TLS certificate was rejected. Check the
certificate.
The IP address was successfully received from the
DHCPv6 server.
The supplicant is waiting for wireless connection to
the access point.
Connection to the file server could not be
established when the remote printer was online.
The file server refused the connection. Check the
file server's configuration.
Connection to the print server could not be
established when the remote printer was online.
The print server refused the connection. Check the
print server's configuration.
A user logged in from the host <IP address>.
Speed of the network (10Mbps, 100 Mbps, or
1Gbps).
The current IP address is <IPX address>.
The DHCPv6 server was not found. Make sure that
the DHCPv6 is on the network.
Communication via PictBridge is unavailable
because PictBridge is disabled in the security mode.
Enable PictBridge in the security mode.
Message List
4
231