Ricoh MP C2800 Operating Instructions Manual page 239

Message
Snmp over IPv4 is ready
Snmp over IPv6 is ready.
Snmp over IPX is ready.
success key received
success but invalid key
supplicant unbound
There is problem in dhcp server operation.
too many pictures.
The print server received error <error number>
during attempt to log in to the network. Access to
the network was denied. Verify that the print server
name and password are correct.
trap account is unavailable.
unauthenticated
Updated (option name)(value) via DHCPv6 Server The parameter obtained from the DHCP server has
usbd is disabled.
waiting for keys
Problem and solutions
Communication over IPv4 with snmp is available.
Communication over IPv6 with snmp is available.
Communication over IPX with snmp is available.
The supplicant received the EAP-Success key.
The supplicant received a message reporting that
EAP authentication was successful, but the EAPOL
key was invalid.
The supplicant is not connected to the unbound
access point.
There is a problem with the DHCP server.
If multiple DHCP servers are active on the network,
check that they are assigning unique IP addresses
to each machine.
PictBridge printing failed because too many image
are sent during one print transaction. Reduce
images at one print transaction.
Login to the file server failed when the print server
was online. The print server is not registered or a
password is specified. Register the print server
without specifying a password
v3Trap cannot be sent. This could be because the
Trap destination account is different from the
account specified by the printer.
The authentication failed. The supplicant was
denied access to the access point, or was not
authenticated.
been updated.
Plug and Play is unavailable because the machine
is in security mode. Enable USBD in the security
mode.
The supplicant is waiting for the session key.
Message List
4
237