Ricoh MP C2800 Operating Instructions Manual page 211

Messages
Full: Log Data Capacity
Full: Waste Toner
Hex Dump Mode
Immed. Trans. not connected
Immediate Transmission Failed
In Use: Copier
In Use: Fax
In Use: Finisher
In Use: Input Tray
In Use: Staple Unit
Independent-supplier Toner
Jobs Suspended
Key Card not inserted
Key Card/Counter not inserted
Key Counter not inserted
Loading Toner...
Log Data Transfer failed
Low: Black Toner
Low: Cyan Toner
Low: Magenta Toner
Getting Printer Information over the Network
Description
The log data capacity is full.
The waste toner is full.
It is a hex dump mode.
It did not connect directly with the other party of the
transmission.
An error has occurred while transmitting directly.
The copier is being used.
The fax is being used.
Other functions is using Finisher.
Other functions is using the input tray.
Other functions is using the staple unit.
Toner that is not recommended is set.
All jobs are suspended.
The machine is waiting for key card to be inserted.
The machine is waiting for key card or key counter
to be inserted.
The machine is waiting for key counter to be left in
it.
Toner is being supplied.
Log transfer has failed.
The black toner cartridge is not set correctly, or
toner is almost running out.
The cyan toner cartridge is not set correctly, or toner
is almost running out.
The magenta toner cartridge is not set correctly, or
toner is almost running out.
4
209