Wireless Lan - Ricoh MP C2800 Operating Instructions Manual

Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
File Transfer
File Transfer
File Transfer
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and
wireless LAN are connected, the selected interface takes precedence.
• p.33 "Interface Settings"
• p.41 "File Transfer"

Wireless LAN

This section lists the settings required for sending files with an Wireless LAN connection.
For details about how to specify the settings, see "Interface Settings" and "File Transfer".
Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Network Settings Required to Use Scan to Folder Function
User Tool
Permit SNMPv3 Communication
Permit SSL / TLS Communication
Host Name
Default User Name / Password
(Send)
Scanner Resend Interval Time
Number of Scanner Resends
User Tool
Machine IPv4 Address
IPv4 Gateway Address
Machine IPv6 Address
IPv6 Gateway Address
IPv6 Stateless Address
Autoconfiguration
DNS Configuration
DDNS Configuration
Setting Requirements
As required
As required
As required
As required
As required
As required
Setting Requirements
Necessary
Necessary
As required
As required
As required
As required
As required
2
87