Locate Popup Window; Performing Auto Locate Operations And Making Transport Settings - Akai MPC 4000 Reference Manual

Other popup windows

Locate popup window

Performing auto locate operations and making transport settings

Here you can specify locate points and locate to them, and change the functions that are
assigned to the keys of the transport section.
To access the popup window[GO TO] key
A Locate block
B Assign locate keys block
Functions
• [F1] key (CLOSE)
Closes the popup window.
• [F2] key (LOCATE 1)
Locates to the location specified by the Locate 1 field.
• [F3] key (LOCATE 2)
Locates to the location specified by the Locate 2 field.
• [F4] key (LOCATE 3)
Locates to the location specified by the Locate 3 field.
• [F6] key (CAPTURE)
Inputs the current location within the sequence into the field. This function can be used
only if the cursor is located in one of the Locate 1–Locate 3 fields.
Locate block
Here you can move the current location of the sequence or song, or register it as a locate
point.
A Go to field
Specifies the locate position in measures/beats/ticks. Press the [GO TO] key once again
to execute the locate.
B Locate 1–Locate 3 fields
These fields specify locate points. While the LOCATE popup window is displayed, you
can use the [F2] key (LOCATE 1)–[F4] key (LOCATE 3) to locate to the specified point.
Hint: The settings of the Locate 1 and Locate 2 fields are common to the punch-in point and punch-out
point. Changing either of these will automatically change the other setting.
When the cursor is in one of the Locate 1–Locate 3 fields, you can press the [F6] key (CAPTURE) to
copy the location of the GO TO field into that field.
248
1
2
1
2