Akai MPC 4000 Reference Manual page 81

• OFF TRACKS IGNORED ..........Tracks in each sequence that are turned off will not
Note: Regardless of the method you select, the settings of the sequence selected for step 1 will be used
as the track settings (e.g., output destination, track type, etc.) after conversion. If the sequences later
than step 1 have a track order that differs from the track order of the step 1 sequence, those steps cannot
be converted correctly. In such cases, use the Change Track Order popup window to rearrange the
tracks to the same order as the step 1 sequence. (For details on the Change Track Order popup window,
refer topage 26.)
6. To execute the conversion, press the [F6] key (DO IT).
The window will close automatically when the conversion has been completed.
Enabling/disabling tempo change events
Tempo change events recorded in a sequence within the song can be enabled or disabled.
1. Move the cursor to the Song field, and turn the [JOG] dial to select the song for
which you want to make settings.
2. Move the cursor to the tempo field, and press the [WINDOW] key.
The Tempo popup window will appear.
A Ignore tempo change events in sequence field
Selects whether tempo change events within the sequences included in the song will be
ignored.
B Fix tempo field
Fixes a standard tempo for all sequences included in the song.
C [F1] key (CLOSE)
Closes the popup window.
D [F6] key (DO IT)
Modifies the tempo of the sequence.
3. Move the cursor to the Ignore tempo change events in sequence field, and
select one of the following settings.
YES ........................Tempo change events within sequences included in the song will be
NO ..........................Tempo change events within sequences included in the song will be
4. To finalize the setting, press the [F1] key (CLOSE).
be converted. After conversion, all tracks will be
on. (However, there will be no data for the regions
in which tracks were off.) Settings such as MIDI
output will be the same as for the first sequence.
1
2
3
ignored.
valid. If this field is set to NO when the SEQ/MAS field is set to
MAS, tempo change events will adjust the tempo relative to the
tempo specified in the Tempo field.
Song page
4
71