Filter Page; Filtering The Incoming Midi Events - Akai MPC 4000 Reference Manual

MIDI mode

Filter page

Filtering the incoming MIDI events

Here you can filter out specific MIDI events that are being input from the [MIDI IN I]
and [MIDI IN II] connectors.
To access this page........[MIDI] key → [F2] key (FILTER)
A MIDI input filter block
B Event block
Functions
• [F1] key (ROUTING)
Displays the Routing page.
• [F3] key (EVENT)
Displays the Event page.
• [F6] key (PANIC)
Sends All Note Off, Reset All Controllers, Damper Off, and Bend 0 messages from the
MIDI connectors.
MIDI input filter block
Here you can select the input connector for which you will make settings, and switch the
MIDI filter on/off.
A MIDI in field
Selects either I ([MIDI IN I] connector) or II ([MIDI IN II] connector) as the connector
for which you will make settings. You can make filter settings independently for each
connector.
B Filter field
Switches MIDI filtering on/off for the selected connector.
Input block
Here you can select the type of MIDI event and the MIDI channel to be filtered.
80
1
2
1
1 2 3
2