Setting The Program Change Transfer; Locating With The Data Wheel; Units Used To Locate A Point - Akai MPC 2000XL Operator's Manual

Chapter 3: Recording Sequences

Setting the Program Change Transfer

You can send program changes on each track in addition to sending program change events
within a track when a sequence is selected.
Sq:01-(Sequence01)
.......................................................
™:120.0(MAS)
Count:OFF
..................................................................................................
Tr:01-Track-01
S:MIDI :10A-Device10 S:MIDI :10A-Device10
STEP
Select the Pgm: field with the CURSOR key and set the program number you want to set with the
data wheel. The program change will not be sent if set to OFF.
To display the following window, select the Pgm: field and press OPEN WINDOW.
Set the field to enable (YES) or disable (NO) the transfer of program change recorded on the
selected track. When this is set OFF, the program change will not be sent even if there is a
program change on the track.

Locating with the DATA Wheel

You can locate a point in the sequence with the DATA wheel.
Sq:01-(Sequence01)
.......................................................
™:120.0(MAS)
Count:OFF
..................................................................................................
Tr:01-Track-01
S:MIDI :10A-Device10 S:MIDI :10A-Device10
STEP
To locate, select the Now: field with the CURSOR keys and increase or decrease the number
with the DATA wheel.

Units Used to Locate a Point

You can select bar/beat/clock or hours/minutes/seconds to be displayed in the Now: field.
Select the Now: field and press OPEN WINDOW.
Timing:1/16
Loop: ON Loop: ON
EDIT TrMUTE
......................................................................................................
Program change Program change
Transmit program changes Transmit program changes
in this track: in this track:YES
........................................................................................................
Timing:1/16
Loop: ON Loop: ON
EDIT TrMUTE
......................................................................................................
Time Display Time Display
Display style:BAR,BEAT,CLOCK
start time:00h00m00s00f00
Frame rate:25
........................................................................................................
Page 56
Now:001.01.00
Tsig: 4/ 4 Tsig: 4/ 4
Bars: 2 Bars: 2
ON:YES Pgm:OFF
Velo%:100
SOLO Tr - Tr +
CLOSE
Now:001.01.00
Tsig: 4/ 4 Tsig: 4/ 4
Bars: 2 Bars: 2
ON:YES Pgm:OFF
Velo%:100
SOLO Tr - Tr +
CLOSE