Akai MPC 4000 Reference Manual page 158

PITCH SHIFTER
This effect modifies the pitch.
Parameter Range
Left
–12.99–+12.99
Feedback
0–127
Right
–12.99–+12.99
Feedback
0–127
Wet/Dry
100/0–0/100
Effect
ON/OFF
REVERB AUDITORIUM
This is a stereo reverb that simulates the reverberation of an auditorium.
Parameter Range
Pre-delay
1ms –100ms
Time 0.1sec –10sec
Diffuse
0 –127
HF damp
20Hz –20kHz
Near
0 –127
Width 0 –127
Wet/Dry 100/0–0/100
Effect ON/OFF
Numerous types of reverb are provided. The adjustments are the same as for AUDITORIUM.
REVERB>BIG HALL
Stereo reverb that simulates the reverberation of a large hall.
REVERB>BIG ROOM
Stereo reverb that simulates the reverberation of a spacious room.
REVERB>BRIGHT HALL
Stereo reverb that simulates the reverberation of a bright-sounding hall.
REVERB>DRUM BOOTH
Stereo reverb that simulates the reverberation of a drum booth in a recording studio.
REVERB>LIVE HOUSE
Stereo reverb that simulates the reverberation of a live house (club).
REVERB>MEDIUM HALL
Stereo reverb that simulates the reverberation of a medium-sized hall.
REVERB>MEDIUM ROOM
Stereo reverb that simulates the reverberation of a medium-sized room.
REVERB>PLATE 1
Simulates the reverberation of a conventional plate reverb device.
REVERB>PLATE 2
Simulates the reverberation of a bright-sounding plate reverb device.
REVERB>SMALL HALL
Stereo reverb that simulates the reverberation of a small hall.
REVERB>SMALL ROOM
Stereo reverb that simulates the reverberation of a small room.
REVERB>STUDIO
Stereo reverb that simulates the reverberation of a recording studio.
Function
Adjusts the amount of pitch shift for the L channel.
Adjusts the amount of delay feedback for the L channel.
Adjusts the amount of pitch shift for the R channel.
Adjusts the amount of delay feedback for the R channel.
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Switches the effect on/off.
Function
Adjusts the delay time of the early reflections.
Adjusts the time until the reverberation dies away.
Adjusts the density of the reverberation.
Adjusts the frequency at which the high-frequency portion of
the reverberation will be cut.
Adjusts the sense of depth.
Adjusts the stereo spread.
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Switches the effect on/off.
Edit page
149