Akai MPC 4000 Reference Manual page 17

If you move the cursor to this field and press the [WINDOW] key, the Auto Punch In/Out
popup window will appear, allowing you to specify the punch-in/punch-out points.
J Sync field
Turns synchronization with external devices on/off. If you move the cursor to this field
and press the [WINDOW] key, the Sync In/Out popup window will appear, allowing you
make synchronization-related settings.
Hint: Synchronization-related settings can also be made in the MISC. mode Sync page.
K Sequence Trans. field
Transposes the playback pitch of all INST type tracks in the sequence. (This does not
affect the note events recorded in the tracks.) Positive settings will cause a # to appear at
the left of the field, and negative settings will cause a b to appear.
If you move the cursor to this field and press the [WINDOW] key, the Transpose Perma-
nent popup window will appear, allowing you to convert the pitch of the note events
recorded in the INST tracks.
Track block
Here you can select the track that you want to record, and specify the output destination
and other settings for the recorded MIDI events.
2
3
A Trk field
Selects the track that your operations will affect. If you press the [WINDOW] key, the
Track popup window will appear, allowing you to assign a name to the track, erase/copy
a track, or specify default settings.
B Type field
Selects one of the following two types for the currently selected track.
DRUM....................The currently selected track will be used as a DRUM type track. You
INST.......................The currently selected track will be used as an INST type track. You
C Mute field
Switches muting on/off for the currently selected track. A
which muting is on, and a
If you press the [WINDOW] key, the Erase All Muted Tracks popup window will appear,
allowing you to erase all currently muted tracks.
D Out1 field
Selects the output destination of the track. You can select the following output destinations.
PART ......................A specific part of the sampler section.
MIDI A–D ..............[MIDI OUT A]–[MIDI OUT D] connector
INT-A/INT-B..........Virtual MIDI port A or B of the sampler section
1 6
4 5 7
can use the matrix display to edit the note events recorded in this
type of track.
can use the piano roll display to edit the note events recorded in this
type of track.
symbol indicates tracks for which muting is off.
Main page
9 8 J
symbol indicates tracks for
7