Akai MPC 4000 Reference Manual page 257

Assign locate keys block
Here you can change the functions that are assigned to the STEP [
[ ]/[ ] keys etc. of the transport section.
< < > >
A <STEP field
Changes the function assigned to the STEP [
B STEP> field
Changes the function assigned to the STEP[
C EVENT field
Changes the function assigned to the [GO TO] key + STEP[
is <EVENT.
D EVENT field
Changes the function assigned to the [GO TO] key + STEP[
is EVENT>.
E <<BAR field
Changes the function assigned to the BAR[
F BAR>> field
Changes the function assigned to the BAR[
G START field
Changes the function assigned to the [GO TO] key + BAR[
is START.
H STOP field
Changes the function assigned to the [GO TO] key + BAR[
is STOP.
I Event field
Selects the events by which you will step when changing the current location in steps of
an event.
ALL ........................All events will be used.
NOTE ONLY..........Only note events will be used.
1 2
3
9
4
] key. The factory setting is <STEP.
<
] key. The factory setting is STEP>.
>
< < ] key. The factory setting is <BAR.
] key. The factory setting is BAR>.
>>
Locate popup window
]/[ ] keys and BAR
< >
5 6
7 8
< ] key. The factory setting
] key. The factory setting
>
] key. The factory setting
<<
> > ] key. The factory setting
249