Akai MPC 4000 Reference Manual page 114

Load mode
A [F1] key (CLOSE)
Closes the popup window.
B [F3] key (SEQ)
Loads only a specific sequence from within the ALL file.
C [F5] key (DO IT)
Loads the data.
To load the ALL file
7. Press the [F5] key (DO IT).
After the data has been loaded, the popup window will close.
To load only a specific sequence from within the ALL file
8. After step 6, press the [F3] key (SEQ).
The Load a Sequence popup window will appear.
A Seq field
Selects the sequence that will be loaded from within the ALL file.
B Sequence list
Selects the sequence number into which the sequence will be loaded.
C [F1] key (CLOSE)
Closes the popup window.
D [F5] key (DO IT)
Loads the data.
9. Move the cursor to the Seq field, and turn the [JOG] dial to select the sequence
that you want to load.
10. Move the cursor to the sequence list, and turn the [JOG] dial to select the
sequence number (within the MPC4000) into which the specified sequence
from the ALL file will be loaded.
If you select a sequence number in which events have already been recorded, that data
will be overwritten.
11. To load the data, press the [F5] key (DO IT).
The sequence will be loaded. This popup window will remain open even after the
sequence has been loaded. If you want to load another sequence, repeat steps 9–11.
12. To close the popup window, press the [F1] key (CANCEL) twice.
The Load a Sequence popup window will close when you press the [F1] key, and the
Load ALL (songs and sequences) File popup window will close when you press the key
again.
104
1
2
3 4