Adding New Key Groups (Key Group Programs) - Akai MPC 4000 Reference Manual

Program mode
F FX field
Adjusts the send level of the signal sent from each key group or note number to the effect
bus, in a range of –40.00–+06.00 (dB).
G Send field
Selects one of the following as the effect bus used by each key group or note number.
OFF ........................The signal will not be sent to an effect bus.
A–D........................The signal will be sent to an effect bus A–D.
AB/CD ...................The signal will be sent to effect buses A and B, or C and D.
MULTI ...................The effect bus assignment specified by the multi will be used.
If you select an effect bus assignment other than MULTI, the effect bus you select here
will be used regardless of the multi settings.
Hint: When the cursor is located at a field in the Sample List block, you can press the [WINDOW] key
to open the Program Modulation popup window.

Adding new key groups (Key group programs)

Here's how to add new key groups to the currently selected key group program.
1. In the Key Group Mix page, select a key group type program.
2. Move the cursor to the Kg field and press the [WINDOW] key.
The Create New Keygroup popup window will appear. This popup window will appear
only if you have selected a key group program.
A Number of new KGs field
Specifies how many new key groups will be created.
B In order of field
Specifies how the key groups displayed in the sample list will be sorted.
C [F1] key (CANCEL)
Cancels the operation and closes the popup window.
D [F3] key (DELETE)
Opens the Delete Keygroup popup window, allowing you to delete a key group.
E [F4] key (COPY)
Displays the Copy Keygroup popup window, allowing you to copy a key group.
F [F5] key (ARRANGE)
Sorts the key groups displayed in the sample list.
G [F6] key (CREATE)
Create the new key group(s).
3. Move the cursor to the Number of new KGs field, and turn the [JOG] dial to
specify how many new key groups will be created.
4. To execute the Create New Keygroup operation, press the [F6] key (CREATE).
The number of new key groups you specified in step 3 will be added to the currently
selected program, and the popup window will close.
200
1
2
3 4 5 6 7