Akai MPC 4000 Reference Manual page 151

Effect mode
DELAY>MULTITAP
This is a delay that lets you produce special effects by adjusting the spacing of the feed-
back sounds and the volume change curve of the feedback sound.
Parameter
Delay
Width
Shape
Slope
Feedback
Pan
Wet/Dry
Effect
Original sound
Shape
Slope
DELAY>PANNING
This delay effect moves the panning of the effect sound from left→center→right (LCR)
or right→center→left (RCL).
Parameter
Delay
Feedback
HFdamp
Mode
Width
Wet/Dry
Effect
DELAY>PINGPONG
This delay effect alternately pans the delay sound to left or right.
Parameter
Delay
Feedback
HFdamp
Width
Wet/Dry
Effect
142
Range
1–127 Adjusts the delay time.
2–15 Adjusts the left/right spread of the feedback sound.
–10–+10 Adjusts the spacing of the feedback sounds.
–10–+10 Adjusts the decay curve of the feedback sounds.
0–127 Adjusts the amount of feedback.
–10–+10 Adjusts the panning of the effect sound.
Adjusts the balance of the effect sound and dry sound. (With a
100/0–0/100
setting of 100/0, only the effect sound is output.)
ON/OFF Switches the effect on/off.
Delay sound
–10
–10
Range
1ms–1500ms Adjusts the delay time.
0–127 Adjusts the amount of delay feedback.
Adjusts the frequency at which the high-frequency range of the
20Hz–20kHz
feedback sound will be cut.
LCR/RCL Specifies the panning effect.
0–127 Adjusts the width of panning.
Adjusts the balance of the effect sound and dry sound. (With a
100/0–0/100
setting of 100/0, only the effect sound is output.)
ON/OFF Switches the effect on/off.
Range
1ms–1500ms Adjusts the delay time.
0–127 Adjusts the amount of delay feedback.
Adjusts the frequency at which the high-frequency range of the
20Hz–20kHz
feedback sound will be cut.
0–127 Adjusts the width of panning.
Adjusts the balance of the effect sound and dry sound. (With a
100/0–0/100
setting of 100/0, only the effect sound is output.)
ON/OFF Switches the effect on/off.
Function
0
0
Function
Function
+10
+10